There are several types of network cable socket. W

2022-07-22
  • Detail

In this Internet age, network cable is needed by every family. For the newly decorated house, the network cable socket has not been connected yet. Many people choose to connect the network cable socket themselves in order to save money. What are the models of the network socket and how is it connected? Next, let's have a look

in this Internet age, network cable is needed by every family. For the newly decorated house, the network cable socket has not been connected yet. Many people choose to connect the network cable socket themselves in order to save money. What are the models of the network socket and how is it connected? Next, let's have a look

there are several types of network cable sockets:

1. Network sockets can also be called network cable modules, which are generally installed on indoor walls as network jacks. At present, there are generally two kinds of twisted pair t568a and t568b in household. In addition to the color codes of t568a and t568b, there are also certain serial numbers marked on the 8 wiring bayonets on each network cable socket. When wiring, just connect each color of twisted pair with the corresponding bayonet

2. There is no difference between t568a and t568b, but they are different in color.

the connection method of t568a is: green white, green, orange white, blue, blue white, orange, brown white, brown

the connection method of t568b is: orange white, orange, green white, blue, blue white, green, brown white, brown

the connection steps of network cable socket:

1. The first step is to remove the network cable plug board from the wall, We can see that the connection places of the network cable plug-in board have color marks, which are generally connected according to the t568b connection method

2. Open the cover of the pressing line, strip the line at the head of the network line for a length of 5 cm, strip 8 lines in turn, and straighten each line, connect them in the color sequence of orange white, orange, green white, blue, blue white, green, brown white, brown, press all 8 lines, press one or two lines at the same time, press all 8 lines in turn, and then cover the cover tightly

3. Finally, use a network cable jumper, insert it into the network port, and test whether both ends are connected with the line measuring instrument. If the interface light is on, it indicates that the connection method is successful. Just plug the wire into the wall and screw it on

precautions for network cable connection:

1. Note that the action should be light when peeling the network cable, and not too hard, otherwise the inner cable will be broken

2. Remember to check. When wiring, be sure that the line is very consistent with the bayonet, and don't mix up some colors. Especially for some network cables that are wound by four white and orange green blue brown wires, it is necessary to pay attention to the removal of other wires after each group of two wires is sent, otherwise it is easy to get confused

3. Don't rush when pressing the line. It's best to use the wire pliers to press the line successively after all the lines are stripped separately. When using the wire pliers, be careful not to cut off the inner wire because the outer side of the wire pliers is long

summary of the article: the above is the introduction of several models of network cable sockets and the relevant contents of the connection steps of network cable sockets. I believe you will have a certain understanding after reading it. Of course, it may be difficult at the beginning, but knowing more in advance and doing more will also help you master this knowledge

济南肿瘤医院

北京不孕不育医院

毕节皮肤病医院

成都男科医院

Copyright © 2011 JIN SHI